“Fraud

J1772 Level 2 Charger

 

The SAE J1772 Level 2 charger is an international standard EV charger. The SAE J1772 is also known as a Type 1 connector or commonly referred to as a J Plug. This connector is used in Electric Vehicles (EVs) mainly in North America and Japan, operating with a single phase of 120V (America) or 208 -240V (Japan), delivering up to 19.2 kW for AC connections.

Learning in detail about Type 1 connectors offers EV owners a better understanding of the charging details of their vehicles. In this article, we will list the different connectors used worldwide for AC and DC charging, introduce a brief history of the SAE J1772 charger, and explain its main features.

Different Types of Connectors

The SAE J1772 and Type 2 connectors are the norm for EV charging in the U.S. and Europe respectively, but there are other EV charging connectors used across different regions. In this section, we will list and name the standard for all of these regions and briefly explain these connectors.

Figure 1: EV Charger Connector Standards – Source: Jia, Q. & Long, T.

Figure 1 illustrates the different connectors used for EV charging with AC and DC across the world. The following is a brief explanation of these connectors.

  • J1772 Type 1 & CCS Combo 1: level 2 J1772 charger is a protocol standard acquired by the SAE (U.S.A.) and CHAdeMO (Japan) for AC charging. The SAE acquired a variation of this charger known as the CCS Combo 1, which includes the DC positive and negative connectors.
  • CHAdeMO: Japan acquired the J1772 for AC charging, but instated the CHAdeMO connector as the industry standard for charging EVs with DC.
  • Type 2 (62196-2) & CCS Combo 2 (62196-3): Type 2 or 62196-2 connector is the European AC standard charging protocol for EVS, instated by the IEC. For DC charging the IEC instated a variation of type 2 connectors, adding the DC positive and negative pins for a connector known as CCS Combo 2 or 62196-3.
  • 20234.2 & 20234.3: China uses a similar standard to the European one, but features male pins instead of females. The 20234.3 is the connector used for EV charging with DC in this country.
  • Tesla: Tesla vehicles use a Tesla Mobile Connector. This type of connector is used all across the world for Tesla vehicles, except in Europe, where the IEC standard is the norm.

History of J1772

The first EVs in the U.S. charged with the SAE J1773 protocol, featuring an inductive charging system. In 2001, the California Air Resources Board (CARB) rejected the SAE J1773 connector and switched to an early version of the J1772 designed by Avcon, featuring a squared shape and a 6.6 kW power rate.

A few years later, the CARB requested an upgraded version of the J1772 featuring a higher power rating, leading to the creation of the current SAE J1772 level 2 charger. The single-phase connector was designed by the Yasaki Corporation, operating at 120-240V AC at a maximum current of 80 amps.

The J1772 was certified by the UL and finally voted as the standard by the SAE in July 2009’s committee. The newly designed J1772 connector became the SAE J1772 charger and was mandated as a standard by the CARB in 2012 and approved as an international standard under the IEC 62196-2 standard.

Main features of J1772

The level 2 charging SAE J1772 connector is a standard for EVs in the U.S. and Japan. This connector designed by the Yasaki Corporation features a 5-pin layout for AC charging.

The main 3 pins connect the Single-Phase AC Line 1 (L1), Neutral AC (N), and Protective Earth (PE) to the EV. The 2 additional pins are the Control Pilot (CP) and Proximity Pilot (PP), operating as safety and communication mechanism between the EV and the charging station.

Figure 2: SAE J1772 Layout – Source: EQPassion

The rated power for AC charging with a level 2 J1772 connector varies. A single-phase 120V connection can operate at a maximum current of 16 amps, delivering up to 1.92 kW, while a split-phase 208-240V connection can operate at a maximum current of 80 amps, delivering up to 19.2 kW. The CCS Combo 1 modification of the SAE J1772 connector, has 7 pins and can deliver up to 400 kW for DC charging.

Featured Products

The best J1772 Level 2 Chargers

Website | Posts

Nick Zamanov is a head of sales and business development at Cyber Switching. He is an expert in EV infrastructure space and he is an EV enthusiast since 2012, Since then Nick strongly believed that electric vehicles would eventually replace Internal Combustion Engine (ICE) cars.